Heat pumps are entirely capable of both heating & cooling… In addition to cooling your dwelling, they also dehumidify it.
Warm air in your dwelling holds a lot of moisture, & as the heat pump cools it, the moisture condenses into water.
Water is drained out of your dwelling through the condensate line of your heat pump, but here are several reasons why you should properly check your condensate line. Throughout the year, algae & other muck build up in the condensate pipe. Water drainage could be hindered if this obstructs the pipe. An obstruction can be taken care of by cleaning out the condensate line with a long, thin stiff-bristled brush. It is honestly easier to control humidity when the water can freely flow through the condensate pipe outside of the dwelling. A blocked condensate pipe or drain valve could cause water to pool in the heat pump’s drain pan. The motor, wiring, & coils of the air handler can be entirely ruined if too much water builds up… Your heat pump could genuinely stop working as a result. The condensate pipe should be able to drain out of the heat pump to prevent any potential disfigurement. Water drips continuously into the condensate pipe while in the summer. Algae & biological growth thrive in the warm, dark, & wet environment. The growth may transfer into the drain pan & air handler, releasing spores that are completely blown into the ducts. Your dwelling’s indoor air conditions will improve if you clean & sanitize the condensate pipe all the time.