Monthly Archives: November 2013

Principle of morning dew

Dehumidifiers condensing type (based on the refrigeration unit) used in residential and ancillary rooms apartments and cottages in the pools and on-site . They afford to rapidly lower the relative humidity in the room with 90-100 % to the most comfortable and supportive for the human body 40-60%. An indispensable condition : drainage should be performed indoors, the temperature of which corresponds to a range of operating temperatures of the selected device .

During operation of wet air in the room passes through the desiccant evaporator on the cold surfaces of which the moisture condenses , and then flows down and is drained into the sump . The dehumidified air is fed to the condenser fan , where it is heated and returned to the room.

Due to repeated passage of air through the dryer air humidity gradually decreases , resulting in enhanced processes of evaporation from wet surfaces of walls and furniture. Getting rid of the excess moisture , and design things dry up , then the humidity in the room is no longer beyond the user-specified values – and dryer automatically shuts off. Continue reading

EFFECTIVE WATER WITH GRUNDFOS – the right way to conserve resources

As is known , Ukraine not apply to countries with efficient use of natural resources . However, over the years , this problem becomes more acute. Significant place in wildlife occupy the rational use of water resources is .

Today, the only tool stimulating the end user to save resources (water , energy ) are tariffs, which significantly outpaces growth official inflation. But do not forget about the water suppliers , who also have to pay the state at the relevant rates for use of water resources . When water is taken and reset rates above the established limits defined by the state, increased significantly.

Therefore, the main task facing the water distribution system is to ensure a stable water supply , water management , which can be very scarce , detection and elimination of pipe rupture , leakage reduction and keeping operating costs as low as possible . Here one of the most effective solutions is to upgrade water systems engineering , which involves the use of high-tech pumping equipment together with modern automated control systems . Continue reading